We sell belts online and understand that sometimes sizing can be tricky: some of us want a belt for a high waist, others for the hips, or even to wear over a coat. That’s why we’ve developed an easy system to adjust your belt to your preferred size.
If the belt is too small, you’ll need to exchange it, but if it’s too big, here’s a tip:
NEVER make extra holes; it looks very unsightly and may not be done perfectly, ruining the belt’s aesthetic!
Most of the time, we don’t fall into an exact size and find ourselves in between sizes. That’s why we always recommend adjusting it to your liking—it’s much quicker, easier, and more reliable than requesting a size change. And the best part? IT WILL FIT PERFECTLY! The adjustment will look just as if we had done it ourselves in our workshop, so don’t worry about ending up with a “fixed” belt—it won’t be like that.
It’s very easy to adjust. We recommend visiting a cobbler who can do it for you in just five minutes at no cost, but if you prefer to do it at home, simply follow these steps:
You’ll need the following:
Start by locating the screw located under the buckle of your belt. Use a screwdriver (preferably a Phillips head) to remove the screw, making sure not to lose it, as you will need it to reattach the buckle later.
Once the screw is removed, separate the leather strap from the belt. Measure the length you want your belt to be. You can compare it to other belts that fit you well or measure directly around your waist. Mark where you need to cut, and we recommend using sharp scissors to make the cut. Ensure it is a straight cut to maintain the belt’s aesthetic.
On the excess leather strip, you’ll find the original hole where the screw goes. Use this as a reference to mark on the newly cut strap where the new hole should be located. At this point, you’ll need a belt hole punch, or you can visit a cobbler who can create the hole for you.
Once you’ve cut the strap to your desired length and made the new hole, it’s time to reattach the buckle. Align the new hole in the strap with the buckle, and insert the screw that connects both parts. Tighten the screw well to ensure the buckle is firmly secured and the belt is safe and functional.
By following these steps, your belt will be perfectly adjusted without the need to make additional holes.
If you’re not comfortable trying this yourself, you can always visit a cobbler who will adjust it at no cost, or we can provide you with a size exchange. Just keep in mind that you might still need an in-between size, so a cobbler’s help could ultimately be the best solution.
